AIR QUALITY CONTROL SYSTEM FOR IVF LABORATORIES

SparMED is proud to introduce all in one system measuring and data logging all parameters required for Air Quality Control in IVF Laboratories.


AIR QUALITY CONTROL SYSTEM SET
Air Quality Control System is composed of the following:
 
Oosafe® Analyzer with WolfSense Software
Brain of the Air Quality Control System which collects and analyzes all data from different probes in real-time.
Up to two Oosafe® Probes and one Graywolf Particle Counter can be connected and data logged simultaneously.
 
Oosafe® VOC-Log for IVF
Real-Time parts per billion (ppb) VOC measurement which is necessary for IVF Laboratories.
TOTAL VOCs, % RH, F° / C° measurements are standard and optionally up to 3 gas sensors (O2, CO, O3, NH3, etc.) can be added to the probe.
 
Oosafe® Air Speed / Temperature / Volume Air Flow Probe for IVF
Air speed and volume in front of the HEPA filters in HVAC systems and IVF Workstations are very critical parameters showing the efficiency of HEPA filters. Filter replacement or system maintenance can be decided after measuring these parameters.
Patented 90° articulating probe design allows each reach to the ceiling diffusers / filters while eliminating internal cabling and cable kinking.
 
GrayWolf 6 Channel Handheld Particle Counter
In order to define Clean Room standard of the IVF laboratories, calibrated 6 channel particle counter is mandatory. It is also used to check the efficiency of the filters inside the laboratories and IVF workstations so that filter replacement time is decided.
Color touch screen 6 channel particle counter (0.3, 0.5, 1.0, 2.5, 5.0 and 10 μm) which has interface to Oosafe® Analyzer with WolfSense Software for enhanced data logging and expanded features. It can also be used as a stand-alone unit.